Skip to main content

Industrial Mechanic/Millwright: Apprenticeship


Get the skills that pay the bills! 

In BC, an individual can become certified as an Industrial Mechanic/Millwright by completing the Industrial Mechanic/Millwright apprentice program.  Apprenticeship programs are designed to provide students the full scope of knowledge and applied skills necessary to perform the occupation.  Apprentices have an employer to sponsor them and are registered with the Industry Training Authority (ITA). 

KPU delivers in-school technical training for Industrial Mechanic/Millwright apprenticeship levels 1, 2, 3, and 4.  The in-school technical training for each level is 7 weeks in duration and includes an end of level exam (level 1-3).  Additional information is available at:

The pathway to becoming a certified Industrial Mechanic/Millwright generally takes 4 years to complete the in-school technical training and work-based training hours. Millwright apprentices will be eligible to write the Red Seal Inter-provincial Examination upon completion of all in-school technical training.  The Red Seal endorsement will be awarded upon completion of 6400 work-based training hours and is recognized in all jurisdictions across Canada; additional information is at:

Training Schedules

KPU apprentice training schedules and waitlists are published on Kwantlen Course Search.  Additional apprenticeship training opportunities are listed on Trades Training BC; this is the hub for BC's Public Trades Training Programs & Services.

Financial Supports for Apprentices

Apprentices may be eligible for financial support for the in-class portion of their training through the EPBC Apprentice Program Financial Supports. Application to this program must be made four to six weeks prior to the start of technical training. Information is available through WorkBC.

Apprentices must apply separately for Employment Insurance (EI) Benefits no later than the last week of work, or during the first week of training, or they will not be eligible to receive EPBC Apprentice Program Financial Supports. EI information can be obtained by visiting Service Canada.

The Canada Apprentice Loan is an initiative of the Government of Canada. As of January 2015, apprentices can apply for up to $4,000 in interest-free loans per period of in-school technical training. Information is available at the Canada Apprentice Loan Service Centre.

General Prerequisites

The following requirements apply:

  • Completed KPU Apprentice Registration
  • Active apprentice registration in the BC Apprenticeship system.
  • Valid Trade Worker Identification number from the Industry Training Authority (ITA-ID). If you do not have an ITA-ID, you will need to complete an apprenticeship registration form through the ITA ( prior to enrolling (Level 1 through to 4). To determine your eligibility please consult with the Industry Training Authority.

Note: International student enrolment requires approval of the Dean.

Curricular Requirements

Note: KPU Tech does not permit students to register in Apprenticeship Levels out of sequence.

Millwright Level 1 (AMIL 1010)

  • Tools
  • Trade Science
  • Work Practices
  • Cut, Fit and Fabricate

Millwright Level 2 (AMIL 1020)

  • Trade Science
  • Service Power Transmissions
  • Cut, Fit and Fabricate
  • Install Equipment
  • Lubricants, Seals and Bearings
  • Service Fluid Power

Millwright Level 3 (AMIL 1030)

  • Service Pumps
  • Service Fluid Power
  • Service Power Transmissions
  • Install Equipment
  • Service Material Handling Systems

Millwright Level 4 (AMIL 1040)

  • Service Prime Movers
  • Trade Science
  • Service Fluid Power
  • Work Practices
  • Install Equipment
  • Service Compressors
  • Operational Equipment Effectiveness

Other Information

Special Equipment

Students are required to supply the appropriate personal safety equipment steel-toed safety boots, safety glasses and coveralls.

Credential Awarded

KPU will report your in-school technical training completion information to the Industry Training Authority (ITA) in order for the ITA to determine credit towards your designated apprenticeship.

At a Glance

Faculty of Trades and Technology

Millwright / Industrial Mechanic

Program Type:

  • Vocational

Credential Granted:

  • No Credential

Offered At:

  • KPU Tech  Cloverdale

Start Date(s):

  • Intake Start Varies  Varies

Intake Type:

  • Open Intake  Apprenticeship


  • Full-time  Full-time

Instructional Cycle:

  • Fixed-term

Curriculum Effective Date:

  • 01-Sep-2016

How to Register:

Last Updated: 14-Jun-2016

This online version of the Kwantlen Polytechnic University Calendar is the official version of the University Calendar. Although every effort is made to ensure accuracy at the time of publication, KPU reserves the right to make any corrections in the contents and provisions of this calendar without notice. In addition, the University reserves the right to cancel, add, or revise contents or change fees at any time without notice. To report errors or omissions, or send comments or suggestions, please email