menu bar spacer

This is an ARCHIVED version of the Kwantlen University College Calendar for 2004-2005 and is provided for historical reference only. See the current version of the Calendar for updated information.

Calendar Home
Dates & Deadlines
Credentials & Degrees
Admission
Timetable
Exam Schedule
Fees
Registration
Financial Awards
Student Records
Credit for Previous Learning
International Education
Programs & Courses

Calendar 2004-2005

The on-line version of the University College Calendar is the Official version. In the event of conflict between the printed version and the online version, the on-line version will prevail.

Effective date of this course calendar information, unless otherwise indicated, is Sept. 1, 2004 to Aug. 31, 2005.

Millwright/Industrial Mechanic

Offered at Newton Campus
Program Length: 11 to 13 months
Start Date: Monthly
Limited Enrolment

Description

Our mission is to educate leaders in the Millwright/Machinist trades.
This program is based upon the National Occupational Analysis (NOA) for the millwright trade. The objective of the program is to provide the student with the basic skills and knowledge in the areas of machine tool use, mechanical maintenance and construction in industrial settings.
The program is organized around the individual needs of the student, and these needs will determine its actual length. Credit will be given for past experience if the student can demonstrate the required skills and knowledge.
The program is offered Monday through Friday on a continuous- intake basis. Most students complete the program in eleven (11) to thirteen (13) months. For further information you can check out the Trades website at: www.kwantlentrades.com.
Students who complete the Entry Level Trades Training (ELTT) are eligible for credit for first year apprenticeship technical training.

Admission requirements

Students must meet either the regular student admission category or the mature student admission category in addition to the following
Note: Students with disabilities must contact the program coordinator to discuss the required skills and competencies and ensure that accommodations can be made.

Content

Hands-on shop experience is the basis on which skills are developed. Advanced subjects include systems of troubleshooting related to checking a machine and diagnosing problems, predictive and preventative maintenance. Priority is given to hydraulics and pneumatic theory of design and troubleshooting.
Speaking the language of the trade is necessary for the graduate in dealing with other trades, service people, distributors and manufacturers. Students will be required to gain proficiency in trade terminology and interpersonal and employability skills.
The student will develop the safe work habits, knowledge and ability required in industry today. Required courses are:
MWIN 1101 Millwright Trade Safety
MWIN 1105 Print Reading and Sketching
MWIN 1110 Measuring
MWIN 1115 Layout and Machine Foundations
MWIN 1120 Hand Tools and Bench Work
MWIN 1130 Welding Basics for Millwrights
MWIN 1205 Lubrication
MWIN 1210 Power Hand Tools
MWIN 1215 Rigging
MWIN 1220 Machine Tools Basics
MWIN 1225 Machine Tools
MWIN 1230 Power Drives
MWIN 1235 Hydraulics
MWIN 1240 Pneumatics
MWIN 1250 Metallurgy
MWIN 1255 Machine Components
MWIN 1260 Bearings and Seals
MWIN 1265 Power Transmission

Cost

In addition to tuition, students should expect to spend approximately $1,800.00 on books and equipment.
Special Equipment
Students are required to supply the appropriate personal safety equipment steel-toed safety boots and coveralls.

Graduation

Upon successful completion of this program, students are awarded a Certificate in Millwright/Industrial Mechanic.
Millwright Faculty Page not found | Kwantlen Polytechnic University
The requested page could not be found.