> Kwantlen Polytechnic University > Calendar 2010-11 > Course Descriptions & Prerequisites > Millwright (Industrial Mechanic)

Millwright (Industrial Mechanic)

MWIN 1101 CR-2

Millwright Trade Safety 

Students will address safe work practices and how they pertain to industrial work sites. They will examine the Occupational Health and Safety Regulation and Guidelines of WorkSafeBC applicable to the millwright trade. Students will practice the safe handling and storage methods for materials and equipment. They will participate in weekly toolbox safety orientation sessions. Students will interact with other students on a program safety committee to achieve an effective safe working environment.

MWIN 1102 CR-0.5

Lift Truck Operator Training

Student will learn to safely operate a sit-down counter-balance lift truck.

Prerequisites: Valid British Columbia Drivers License (Minimum New Driver Classification)

MWIN 1105 CR-2

Print Reading and Sketching

Students will interpret engineering drawings and sketches and will make decisions pertaining to the manufacture, installation, positioning, and/or maintenance of machines or machine components. They will make standardized sketches of machine shop drawings, machine installation drawings, assembly drawings, and detailed engineering drawings. Students will communicate technical information as to the size, shape, construction, and installation details of parts, mechanisms or machines.

Corequisites: MWIN 1101

MWIN 1111 CR-2

Measuring and Layout Tools

Students will use a variety of measuring and layout tools. They will use techniques appropriate and necessary to make non-precision and precision measurements in either imperial or metric standard. Students will develop strategies from a blueprint or sketch, then lay out the shapes or objects (parts) for manufacture. They will complete assignments that challenge them to make informed decisions on selection, use, concepts and procedures used with each tool or combination of tools taught. Students will develop an understanding of the need for consistency and accuracy based on equipment use. They will make sketches that use detailed methods of reporting.

Corequisites: MWIN 1101

MWIN 1121 CR-1

Hand Tools and Bench Work

Students will develop basic hand skills that are the foundation for becoming a millwright (industrial mechanic) craftsperson. They will complete shop projects that involve bench work to practice hand skills using metal cutting tools, holding tools, striking tools, and assembling tools. Students will develop knowledge and skill in tool identification, tool selection, and tool maintenance.

Corequisites:MWIN 1101

MWIN 1130 CR-5

Welding Basics for Millwrights

Students will use a variety of welding processes, welding equipment and other metal working tools appropriate and necessary for the task of joining metals. They will learn and practise procedures, terminology and appropriate safety precautions, as applied to oxy-acetylene use and shielded metal arc welding processes.

Prerequisites: MWIN 1101

MWIN 1131 CR-1

Power Hand Tools

Students will develop and practise the skills required to safely use a large selection of power hand tools used in industrial applications. They will use tools such as electric power tools, pneumatic tools, honing tools, and chain saws. Students will plan and develop strategies to complete projects, and will create written maintenance reports on pieces of equipment or procedures for tool use. They will be certified in the use of selected powder actuated (explosive) tools.

Corequisites: MWIN 1121

MWIN 1140 CR-4

Machine Tools

Students will operate machine tools like milling machines, lathes and a variety of other machine tools to produce industrial components/parts. They will develop machining knowledge and skills while accurately producing these various parts to given specifications. Students will use reasoning and problem solving skills to interpret print information, plan machine tool operations and demonstrate safety awareness when using the machine tools.

Prerequisites: MWIN 1131

MWIN 1146 CR-2

Mathematics I for Millwright

Students will learn to use percentages, equations, formulas, geometry, measurements, and right angle trigonometry in the context of the scientific principles and applications found in the millwright/machinist trade. They will be prepared to the National Occupational Analysis standard.

Prerequisites: ABEM 0077 or PSPM 1077 or Vocational Placement Test

MWIN 1150 CR-2

Machine Tool Basics

Students will operate standard machine tools like metal-cutting saws, drilling machines, bench grinders and surface grinders. They will learn machining fundamentals and common methods of machining and shaping parts to meet given specifications. Students will practice common machining techniques to accurately produce shapes of various types on these machine tools. They will use reasoning and problem solving skills to interpret print information, plan machine tool operations and demonstrate safety awareness when using the machine tools.

Prerequisites: MWIN 1140

MWIN 1160 CR-1 (formerly 1230)

Fasteners and Fittings

Students will identify and use a wide variety of fasteners to complete assignments that require them to differentiate between thread systems. They will use drawings, parts catalogues and service manuals to locate technical information on fasteners. Students will select the necessary and appropriate hand tools to make bolted and screwed connections and ensure that parts are assembled to specifications.

Prerequisites: MWIN 1140

MWIN 1170 CR-1.5

Metallurgy

Students will participate in lectures and will work in small discussion groups to examine and differentiate the properties of metals, interpret heat-treatment terms, and learn the requirements for different metal heat-treatments. They will learn the basics of different metal manufacturing processes. Students will experiment with identifying different properties of metals and non-metals, with conducting heat-treatments, and with destructive and non-destructive tests on metal samples In the shop.

Prerequisites: MWIN 1121

MWIN 1180 CR-2.5

Level 1 Welding for Millwrights

Students will use a variety of welding processes, welding equipment and other metal working tools appropriate and necessary for the task of joining metals. They will learn and practise procedures, terminology and appropriate safety precautions, as applied to oxy-acetylene use and shielded metal arc welding processes.

Prerequisites: MWIN 1103

MWIN 1205 CR-1

Lubrication

Students will study principles of friction, lubrication theory, and the function of lubricating products. They will dismantle, inspect, assemble, and test mechanical lubrication systems for maintenance then complete maintenance reports.

Prerequisites: MWIN 1120 and 1145 and 1146

MWIN 1215 CR-3

Rigging

Students practice and develop the skills to tie knots, bends and hitches for specific rigging applications. They will select ropes, slings, hoists, attachments, and other rigging equipment to safely lift and move heavy objects. Students demonstrate their knowledge of Provincial Occupational Health and Safety Regulations pertaining to rigging through practical competencies and written tests.

Prerequisites: MWIN 1120 and 1145 and 1146

MWIN 1225 CR-4

Machine Tools

Students will master the skills and related knowledge necessary to operate engine lathes and milling machines. They will practise fundamental machining techniques used to make precision parts. Students will interpret print information, plan machine tool operations, and select the necessary tooling to set up and safely run these machine tools.

Prerequisites: MWIN 1120

Corequisites: MWIN 1101

MWIN 1235 CR-3

Hydraulics

Students will learn fluid power theory, terms, and basic hydraulic system design attending lectures and working in small groups. They will use computer simulation software and hydraulic training panels to construct and trouble-shoot circuits and examine how system components interact. In the shop students will inspect and reassemble selected hydraulic components.

Prerequisites: MWIN 1120  and 1145 and 1146

MWIN 1240 CR-3

Pneumatics

Students will learn gas theory and circuit design methodologies while attending lectures and working in small groups. They will use computer simulation software and pneumatic training panels to design, construct, and trouble-shoot circuits and examine how systems components interact. In the shop, students will report on distribution systems, conduct routine compressor inspections, and dismantle, inspect and reassemble pneumatic components.

Prerequisites: MWIN 1120 and 1145 and 1146

MWIN 1245 CR-1.5

Communication Skills for Trades II

Students will further develop their oral and written communications skills as need to complete their trades courses and to function efficiently on the job site. They will expand their oral communications skills by looking at job-related conflict resolution and their writing skills by learning specific task-related skills.

Prerequisites: MWIN 1145

MWIN 1255 CR-2.5

Machine Components

Students will use a variety of techniques to disassemble, inspect, evaluate, repair, reassemble, and align machines and their components. They will select the necessary and appropriate hand tools and heating equipment that enable them to practise fitting techniques used in the assembly of individual mating components that machines are made of.

Prerequisites: MWIN 1230 and 1205 and 1115

Corequisites: MWIN 1101

MWIN 1260 CR-3.5

Bearings and Seals

Students will select the necessary and appropriate hand tools and heating equipment to enable them to work on various types of bearings and seals. They will practise fitting techniques used in the assembly and disassembly of bearings and will learn to correctly manipulate and assemble the different types of seals.

Prerequisites: MWIN 1255

Corequisites: MWIN 1101

MWIN 1265 CR-4

Power Transmission

Students in classroom lectures and discussions will explore power transmission fundamentals and solve mathematical and mechanical problems relevant to the power transmission industry. They will work in the shop to practise the fitting and mechanical skills required to disassemble, inspect, analyze, repair and make written technical reports on gear drives, belt drives, clutches, brakes, chain drives and other power drive equipment.

Prerequisites: MWIN 1260

Corequisites: MWIN 1101

MWIN 2105 CR-3.5

Material Handling Systems

Students will learn principles, concepts, and installation and service procedures of material handling systems. They will use various system names and terminology, identify system construction and function, and explain material handling theory. Students will perform general maintenance and servicing procedures on conveyors, blowers, fans, and loading and unloading systems. They will utilize employability skills and adhere to safe work procedures.

Prerequisites: MWIN 1215 and 1230 

MWIN 2150 CR-2 (formerly 1250)

Metallurgy

Students will participate in lectures and work in small discussion groups to examine and differentiate the properties of metals, interpret heat-treatment terms, and learn the requirements for different metal heat-treatments. They will learn the basics of different metal manufacturing processes. In the shop, students will experiment with identifying different properties of metals and non-metals, with conducting heat-treatments, and with destructive and non-destructive tests on metal samples.

Prerequisites: MWIN 1245 and 1246

MWIN 2155 CR-3 (formerly 1255)

Machine Components

Students will use a variety of techniques to disassemble, inspect, evaluate, repair, reassemble, and align machines and their components. They will select the necessary and appropriate hand tools and heating equipment that enable them to practise fitting techniques used in the assembly of individual mating components that machines are made of. Students will participate in lectures and will complete written reports and assignments.

Prerequisites: MWIN 1230 and 1245 and 1246

MWIN 2160 CR-3.5 (formerly 1260)

Bearings and Seals

Students in classroom lectures and discussions will explore power transmission fundamentals and solve mathematical and mechanical problems relevant to the power transmission industry. They will work in the shop to practise the fitting and mechanical skills required to disassemble, inspect, analyze, repair and make written technical reports on gear drives, belt drives, clutches, brakes, chain drives and other power drive equipment.

Prerequisites: MWIN 1205 and 1230

MWIN 2165 CR-4 (formerly 1265)

Power Transmission

Students in classroom lectures and discussions will explore power transmission fundamentals and solve mathematical and mechanical problems relevant to the power transmission industry. They will work in the shop to practise the fitting and mechanical skills required to disassemble, inspect, analyze, repair and make written technical reports on gear drives, belt drives, clutches, brakes, chain drives and other power drive equipment.

Prerequisites: MWIN 1205 and 1215 and 1230

MWIN 2210 CR-3

Industrial Pumps

Students will identify, inspect, analyze, and troubleshoot pumps and compressors. They will discuss dynamic and positive displacement pump theory, explain and conduct trouble shooting, preventative maintenance and repair procedures as well as make written reports. Students will utilize employability skills and will adhere to safe work procedures.

Prerequisites: MWIN 1246 and 1230

MWIN 2220 CR-3

Basic Industrial Electricity

Students will learn basic principles of electricity and electromagnetism. They will identify safety problems, solve basic electrical problems and interpret basic electrical circuits for industrial applications. Students will explain industrial control fundamentals and electrical troubleshooting basics. They will learn electrical knowledge to make safe decisions when working on or around electrical equipment. Students will utilize employability skills.

Prerequisites: MWIN 1246

MWIN 2240 CR-4

Industrial Prime Movers

Students will identify industrial prime movers such as electric motors, stationary industrial internal combustion engines, and a variety of turbines. They will describe basic concepts and working principles of the various prime mover types and operation, including control and safety devices. Students will solve problems related to force, torque, energy, work, and horsepower. They will perform maintenance and troubleshooting procedures on industrial prime movers. Students will utilize employability skills and will adhere to safe work procedures.

Prerequisites: MWIN 1246 and 1230

MWIN 2245 CR-4

Operational Effectiveness

Students will examine and apply concepts, terminology and procedures associated with the operational effectiveness of an industrial installation. They will use maintenance planning tools, perform vibration analysis procedures, perform static balancing; they will explain single-plane and two-plane vector balancing procedures, identify methods of industrial refrigeration, pollution control, and conduct advanced multiple machine and optical alignments. Students will utilize employability skills and will adhere to safe work procedures.

Prerequisites: MWIN 1245 and 2150 and 2160

Page not found | Kwantlen Polytechnic University
The requested page could not be found.