> Kwantlen Polytechnic University > Calendar 2010-11 > Course Descriptions & Prerequisites > Welding

Welding

WELD 1010 CR-1

Worksite Safety and Orientation

Students will identify and respond to workplace hazards. They will safely use and maintain welders’ hand tools, portable power tools, and personal safety equipment. Students will study the role of WorkSafeBC and their responsibility to apply its regulations and policies.

WELD 1115 CR-4

Oxy Fuel Welding and Cutting

Students will learn the function of each component in an oxy fuel welding and cutting system, and will assemble, test, adjust and operate this equipment. They will study the properties of high pressure oxygen, acetylene and propane gases, and will learn and apply oxy fuel safety regulations. Students will develop skill by completing a variety of welding and cutting exercises.

Prerequisites: WELD 1010

WELD 1120 CR-4

Basic Shielded Metal Arc Welding

Students will study shielded metal arc welding (SMAW) theory and applications. They will select, set up and adjust SMAW power sources. Students will learn the composition and classification of SMAW electrodes. They will develop skill by completing a variety of welded joints. Students will learn to apply SMAW safety regulations.

Prerequisites: WELD 1115

WELD 1130 CR-4

Basic Gas Metal Arc Welding

Students will study basic gas metal arc welding (GMAW) theory and application. They will select, set up, and adjust GMAW power sources and wire feeders. Students will learn the composition and classification of GMAW electrode wires and shielding gases. They will develop skill by completing a variety of weld joints. Students will learn and apply GMAW safety standards.

Prerequisites: WELD 1120

WELD 1140 CR-1

Material Handling

Students will study hand and power rigging techniques used by welders and fabricators. They will select and use slings, shackles, spreaders and related rigging hardware. Students will learn the concepts of safe working load, centre of gravity, and rigging limitations. They will learn and apply the Occupational Health and Safety Regulations and Guidelines of WorkSafeBC.

Prerequisites: WELD 1130

WELD 1200 CR-1

Air Arc and Plasma Arc Cutting

Students will study air arc and plasma arc theory and application. They will select, set up, and operate plasma arc and air arc power sources. Students will use and maintain torches and related equipment. They will develop skills by cutting carbon steel, stainless steel and aluminum plate. Students will learn and comply with air arc and plasma arc safety regulations.

Prerequisites: WELD 1140

WELD 1201 CR-.50

Material Handling

Welders require a broad knowledge of materials handling procedures. WELD 1201 ranges from a study of ropes wire ropes, chains and a variety of rigging hardware to lifting and pulling equipment, manual and electrical hoists and cranes.

Prerequisites: WELD 1101

Corequisites: WELD 1103

WELD 1202 CR-3

Blueprint Reading I

This course is designed for the welder who has no experience in drafting. From simple sketches the course advances to dimensioned drawings and the interpretation of structural drawings. The welder's special needs are emphasized throughout. There is a mathematics module to refresh skills in practical calculation.

Prerequisites: WELD 1102

Corequisites: WELD 1104, WELD 1105

WELD 1204 CR-1

Welding Quality Control and Inspection Procedures

This course surveys the tests employed in industry to ensure welds of high quality. WELD 1204 is a theory course covering the destructive and non-destructive tests currently in common industrial use.

Prerequisites: Level C

WELD 1205 CR-1

Welding Codes, Standards and Specifications

Welding codes, standards and specifications are guarantees of public safety and product quality. WELD 1205 provides the student with an understanding of the origins, purposes and enforcement of regulations and the way they will affect his work and career development.

Prerequisites: Level C

WELD 1206 CR-1

Blueprint Reading II

WELD 1206 trains the welder to read and interpret piping drawings. As well as recognizing the manufactured components and their symbols the student learns to design templates for the construction of elbows and tees.

Prerequisites: Level C

WELD 1207 CR-1

Welding Metallurgy II

This is a metallurgy theory course that provides the Level B welding student with knowledge of the grain structure of metals and the effects of alloy content and heat treatment on the weldability of steel and aluminum.

Prerequisites: Level C

WELD 1210 CR-4

Advanced Shielded Metal Arc Welding

Students will study advanced Shielded Metal Arc Welding (SMAW) theory and application. They will describe the major components and operating principles of SMAW power sources. Students will review the composition and application of SMAW electrodes. They will further develop their skills by completing a variety of welded joints.

Prerequisites: WELD 1200

Corequisites: WELD 1220

WELD 1220 CR-1

Read Technical Drawings

Students will read and interpret fabrication drawings. They will study the principles of orthographic and pictorial projections, including all lines, views and related information. Students will interpret symbols, abbreviations and material specifications. They will identify and solve dimensioning problems.

Corequisites: WELD 1210

WELD 1230 CR-4

Advanced Gas Metal Arc Welding

Students will study advanced Gas Metal Arc Welding (GMAW) and Flux Core Arc Welding (FCAW) theory and application. They will describe the operating principles of constant voltage power sources and wire feeders. Students will learn the properties and applications of blended shielding gases. They will select and use solid and tubular electrodes. Students will further develop their skills by completing a variety of welded joints.

Prerequisites: WELD 1220

Corequisites: WELD 1240

WELD 1240 CR-1 (formerly 1203)

Basic Metallurgy

Students will study the physical and mechanical properties of ferrous and non ferrous metals. They will describe the manufacture and processing of iron and steel. Students will learn to identify metals using practical techniques. They will classify and describe applications of iron and steel products.

Prerequisites: WELD 1220

Corequisites: WELD 1230

WELD 1250 CR-2

Stationary Shop Equipment

Students will select, set up and operate stationary fabrication equipment. They will use and maintain press drills, stationary saws, iron workers and power squaring shears. Students will develop skill by working on individual and group projects. They will comply with fabrication machinery safety regulations.

Corequisites: WELD 1230 and 1240

WELD 2100 CR-5

Shielded Metal Arc Pipe Welding

Students will study pipe welding theory technique and safety using the Shielded Metal Arc Welding process (SMAW). They will learn appropriate tool use, pipe groove preparation and fitting techniques. Students will work with a variety of pipe diameters, schedules and electrodes. They will develop skill by welding pipe in all positions. Students will visually and destructively test their work

Prerequisites: WELD 1210

Corequisites: WELD 2110

WELD 2110 CR-3

Welding Standards and Testing

Students will study destructive and non-destructive testing methods applied to welded connections. They will learn and comply with welding codes and standards for structural steel, boilers and piping. Students will learn the importance of quality control and management in manufacturing, construction and maintenance operations. They will describe welding testing and certification

Prerequisites: WELD 1210 & 1230

Corequisites: WELD 2100

WELD 2120 CR-3

Gas Metal Arc Alloy Welding

Students will study advanced Gas Metal Arc Welding (GMAW) techniques used to weld aluminum, stainless steel and alloy steel products, and the identification and correction of weld faults. They will review constant voltage power sources and specialized wire feeders. Students will select and use a variety of alloy electrode wires and shielding gases. They will develop skill by safely welding aluminum, stainless steel and alloy steels

Prerequisites:WELD 2100 & 2110

Corequisites: WELD 2130

WELD 2130 CR-3

Piping Drawings

Students will read and interpret pipe fabrication and installation drawings. They will learn orthographic and isometric formats. Students will use symbols and terminology specific to pipe work. They will identify and describe applications for common pipe fittings and components and use piping mathematics. Students will lay out elbows, tees and offsets.

Prerequisites:WELD 2100 & 2110

Corequisites: WELD 2120

WELD 2140 CR-3

Piping Drawings

Students will study advanced Flux Core Arc Welding (FCAW) techniques used in heavy machinery and structural fabrication. They will review constant voltage power source and wire feeder theory. Students will select and use gas shielded and self shielded electrodes. They will develop skill by completing a variety of welded joints to high standards using the appropriate safety equipment. Students will visually and destructively test their work.

Prerequisites:WELD 2120 and 2130

Corequisites: WELD 2150

WELD 2150 CR-3

Alloy Metallurgy

Students will study the microstructure of ferrous and non-ferrous alloys. They will describe the heat treatment of steel and aluminum. Students will identify the effects of alloy content on the weldability of steel and aluminum.

Prerequisites:WELD 2120 and 2130

Corequisites: WELD 2140

WELD 2160 CR-3

Basic Gas Tungsten Arc Welding

Students will study Gas Tungsten Arc Welding (GTAW) theory and application. They will select, setup and adjust high frequency power sources. Students will learn the composition, classification and application of tungsten electrodes, shielding gases and filler material. They will develop skill by practicing a variety of welded joints on mild steel, stainless steel and aluminum using the appropriate safety equipment. Students will learn and apply GTAW regulations.

Prerequisites: WELD 2140 and 2150

WELD 2200 CR-2.5

Shielded Metal Arc Alloy Welding

Students will study alloy steel and stainless steel welding using the Shielded Metal Arc Welding (SMAW) process. They will select and use specialized coated electrodes. Students will prepare and fit alloy plate and pipe. They will develop skill by completing a variety of welded joints, and identify and correct weld faults. Students will visually and destructively test their work.

Prerequisites: WELD 2160

Corequisites: WELD 2210

WELD 2210 CR-1

Advanced Alloy Metallurgy

Students will study the weldability of non-ferrous and reactive metals. They will learn the physical and mechanical properties of nickel, copper, magnesium, titanium and zirconium alloys. Students will describe joint geometry, joint preparation, cleaning and shielding methods. They will identify and correct welding problems.

Prerequisites: WELD 2160

Corequisites: WELD 2200

WELD 2220 CR-3

Gas Tungsten Arc Alloy Welding

Students will study alloy steel and stainless steel welding using the Shielded Metal Arc Welding (SMAW) process. They will select and use specialized coated electrodes. Students will prepare and fit alloy plate and pipe. They will develop skill by completing a variety of welded joints, and identify and correct weld faults. Students will visually and destructively test their work.

Prerequisites: WELD 2200 and WELD 2210

Corequisites: WELD 2230

WELD 2230 CR-3

Plate and Pipe

Students will study parallel line development, radial line development and triangulation. They will lay out and develop offsets, cones and square to round transitions. Students will solve angles, circumference and true lengths required for pipe and plate development.

Prerequisites: WELD 2200 and WELD 2210

Corequisites: WELD 2220

Page not found | Kwantlen Polytechnic University
The requested page could not be found.